Hot air stove HEATER – 25 kW

Description

Warm air wood stove HEATER - 25kW is recommended for heating larger production halls and workshops, as well as clubhouses, outbuildings or storage rooms, etc.

We recommend for a space of 500 m3

When using the stove, the door of the stove must always be closed, except when adding fuel or when adjusting the hearth in any way, primarily to prevent the escape of flue gases into the heated room.

During heating, it is necessary that the flap of the combustion air supply regulator is always open (the draft of the stove will increase).

The stove does not have a grate, and therefore the ash is not completely removed, but instead a small, even amount is left as a hearth, the remaining layer of ash extends the long-term life of the stove by 20% and at the same time ensures the temperature difference needed for rapid melting, e.g. for the hot air flow of the stove.

On order : Please contact us

• Stand,
• Casing of hot air stoves
• Glass door ( the stove is supplied with a solid door as standard )
• Heat exchanger
• Additional hot air exchanger
• Type (power): 25 kW
• Heated space: 500 m³
• Flue diameter: 160 mm
• Number of tubes: 13 pcs
• Flue axis: 650 mm
• Length: 1080 mm
• Width: 650 mm
• Fuel consumption: 7.4 kg/hour
• Mass: 125 kg
• Log length: 780 mm
• Declaration of Eigenschaften gemäß der Verordnung Heater 25
• declaration-of-characteristics-25kw